Milling,Turning,Welding | Home Machine Shop

Inverter Welding Set

My Favorite Family tent: Coleman Instant 8-Person Two Room Tent   by James

I love tent camping because you get to really be out in nature. Before, I always go out camping with one or two people. But recently I want to camping with my whole family which have 6 persons. The entire family can enjoy a week out tent camping is wonderful. So, first I have to choose a family tent. There are a number of different styles of tents available today and I should have to decide what will work best for my family.

I take it upon myself to do the research to find the best family tent in the market and eventually came up with the Coleman Instant 14- by 10- Foot 8- Person Two Room Tent.

What to Look for When Buying family tent

It didn’t take my long to realize that there are a few important things to keep in mind when buying a drill. These are:

·The space

·The room

·The height

·Easy to use

·The waterproof

·The door and windows

How much space should the family tent have?

For a family camping, the tent should have enough space for all the person. This Coleman tent supply for 8 persons. The tent base measures 14 by 10 feet. It’s big enough for a family which has about 8 persons. If your family doesn’t have so many people, you can take the extra room to store other things. You can put the backpacks, shoes, foods, BBQ, or anything else you need to keep in the tent with you without feeling crowded.

For a family of six I recommend a 8-persent tent. As a rule-of-thumb, when you choose a tent, you should buy a tent that has a capacity rated two people higher than the number that will actually be using it.

Family tent’s room

Coleman Instant 14 by 10 Foot 8 Person Two Room Tent4 My Favorite Family tent: Coleman Instant 8 Person Two Room TentThe room of the family tent is also very important. You may want to check out the multi-room tents. If you want to camp with the kids, a 2-room tent provides a little privacy. You can leave one room for adults, one room for the kids. This multi-room tents come in 2-room styles, where the rooms are separated by an inside tent wall with a zippered door.

Family tent’s height

For a family tent, the headroom is very important which should allow the tallest person in the group to stand up inside. Being able to stand up comfortably makes rainy days inside the tent much more tolerable. This Coleman tent’s center height is 6 feet 5inches. The height is enough for most of people.
Family tent: Set up or tear down quickly

Coleman Instant 14 by 10 Foot 8 Person Two Room Tent8 My Favorite Family tent: Coleman Instant 8 Person Two Room Tent

When you want to buy a family tent, you should consider the imperative of tent. Most people may think that the bigger of the tent, the harder to set up or tear down. But this Coleman instant tent is very easy to use. The system is simple and straightforward. You can set up or tear down it in 1 minute or less. Imagine that, in a rainy day, you can set up this family tent quickly enough to protect your family.

Why you can easy to set up this tent in one minute or less? The secret to the tent’s easy setup is the pole system. The pole of this tent is pre-attached. The external frame and tent never come apart, so you don’t have a chance to lose anything. I have set the tent up on my own, but, frankly, it’s easier to set up when you have the help of one other person.

Waterproof of the family tent

The waterproof of the tent is important to all kinds of tent. This Coleman instant family tent has an exclusive WeatherTec system. It is built with a coated polyester fabric combined with anti-wicking thread, webbing, and zippers. These are designed to keep you dry when the rain comes down.

The tent’s welded waterproof floor and inverted floor seams, at the same time, dramatically increases the water resistance by holding the needle holes inside the tent and away from the elements.

In fact, Coleman is always confident in its WeatherTec system. It exposes its WeatherTec tents to a rain room that simulates nasty downpours, and to a wind machine capable of blowing hurricane force gusts. The waterproof of their tents are very good. Even after the tests, its WeatherTec tents will keep you dry.

Campers will also love this tent’s windproof. It has the strong, wind-responsive frame including redesigned poles and guy-out triangles that anchor the tents and increase performance.

Family Tent’s door and windows

Double doors are a big convenience especially for a family camping. They add ventilation and minimize having to climb over someone else to enter or exit the tent. With this tent, you can make one door for entry, the other one for exit. These two door will make the room always have the fresh air. Seven windows provide great ventilation, 360° views which you can easier decide how to pitch the tent to get good views, privacy and resistance to wind and rain.

This Coleman tent’s room space can change. It’s wonderful. You can make one room big, the other one small. Campers have their choice of sleeping in one large room with enough space for eight people, or dropping down the divider and turning the tent into a two-room palace. If you don’t have so many people, you can make one room to be a vestibule. You can store gear if it’s raining outside. Large vestibule also let a dog sleep in a protected space, yet outside the tent.

Other tent features:

This family tent’s exterior is tough and long-lasting. It’s made with heavy-duty 150D construction that’s twice as thick as Coleman’s standard tent fabric.

Fully taped seems with 150D fabric allows Coleman to provide the keeps you dry guaranteed without the need to install a rain fly.

This Coleman family tent has an interior gear pocket, reverse angle windows, and easy-to-follow instructions sewed into the durable carrying bag.
Where Can I Buy the Coleman Instant 14- by 10- Foot 8- Person Two Room Tent

You can buy this Coleman Instant Tent on Amazon. At the moment they include free super saver shipping and from what I can tell when comparing prices with other online merchants, Amazon do currently have the best deal especially with the free shipping option. Click here to view on Amazon.

Where Can I Read More Reviews about This Tent?

The best place for reviews from people who actually use the product is Amazon. Click here to read more.

What Others are saying about this tent

This tent has received many good reviews from most consumers on the net with an average of 4.4 out of 5 from most reviewers on Amazon and the Coleman website itself.

Here are some of the comments to date:

“Great tent, would be worth 5 starsâ

Welders For Sale

Castolin Eutectic ID Bore Weld 25 For Sale with Westermans

Welding Supplies

Arc Welding Accessories — Foster Industrial UK

As one of the oldest of the welding processes, Arc Welding is officially called Manual Metal Arc Welding (or MMA) and the process is also known as Arc Welding, Stick Welding or Rod Welding. In Arc Welding an arc is struck between the Welding Electrode and the job, at the same time as the metal core of the Welding Electrode melts, a flux around the Welding Electrode burns to create a gas shield around the Welding Arc.

Arc Welding Accessories from Foster Industrial includes electrode holder-200 amp crocodile type, electrode holder-400a twist red, earth clamp-600 amp brass, earth clamp-200 amp crocodile, earth clamp-400 amp crocodile, earth clamp-600 amp (screw), welders quiver-heated 110v/240v, wire brush 4 row,wire brush 4 row stainless, chipping hammer-steel, gouging carbon-10mm plain,gouging carbon-8mm plain and gouging torch-600 amp swivel neck k3.

Foster Industrial’s expertise, quick response call-outs and technical know-how have secured service contracts with blue chip organisations in the area – enhancing Foster Industrial’s reputation as a dynamic and innovative supplier.

As UK’s premier choice for welding supplies, Foster Industrial aims to provide its customers Professional and Quality Service at all times. With our wide range of welding supplies that include Mig Welder, Tig Welder, Plasma Cutter or just welding Spares and Accessories. Our reputation is built on top level service with quality products at a fair price. If you are interested in any welding & fabrication items, or would like more information, call at either: Nottingham 0115 970 0598 or Leicester 0116 262 1386. Alternatively, send an email: sales@fosterindustrial.co.uk About Author: Foster Industrial is one of the UK’s leading Industrial suppliers stocking items from welding supplies to plasma cutters, safety wear to abrasives

Fosters

View all articles
.

Welding Supplies Indiana

Inverter Welders For Sale Uk

Inverter Plasma Cutter – For a smooth welding process   by David

With world economy is heavily relying on country’s manufacturing capabilities; there is a strong need for highly advanced welding machines for different kinds of welding applications. All thanks to the advanced plasma cutters that made welding extremely easy and cost effective. Do you know how plasma is produced? To produce the plasma, the pilot arc type uses two cycle, therefore saving the need for the primary contact.

To produce a very small unit of high intensity spark within the torch body, a high voltage and a low current circuit is employed. Therefore a small pocket of plasma gas is produced. This is nothing but pilot arc. The pilot arc consists of a return electric path that is connected or built in the torch head. Until the plasma arc is not brought into the proximity of the work piece, the pilot arc maintains itself, where the main plasma cutting arc is ignites. Plasma arcs are in of all ranges and they are extremely hot. Plasma cutting arc is a well versed arc.

Inverter plasma cutter is found to be extremely effective for cutting thick and thin materials. These hand-held torches are capable of cutting up to two inches in thick steel plate and the stronger computer controlled torches can cut up to six inches thick metals. A hot and much localized “cone” is produced by the plasma cutter which is used very well for cutting the sheet metals in angled or curved shapes. Safety gadgets and steps should always be handy with the welders. Welding goggles and face shield are the instrument in eye protection and they are needed to prevent eye damage. This is called arc eye and as well as damage from derby.

In an inverter plasma cutter, different methods are used by the plasma cutter to initiate the arc. By bringing the plasma torch in contact with the work piece the arc is creates in some of the units. Some cutters make the use of high voltage and high frequency circuit to start the arc. Risk of electrocution, spark gas maintain, difficulty pf repair, and large amount of frequency emission are included with large number of other disadvantages. Lots of pilot arc starts by other means, that is when the plasma cutter works near sensitive electronic such as computers and CNC hardware the electrode and the nozzle are connected. The nozzle is known to be cathode and the electrode is known as anode. The nozzle is blown forward when the plasma gas is begun to flow. A silicon controlled rectifier is a third less common method which is processed as capacitive discharge into the primary circuit.

Searching for more information on inverter plasma cutter and mig gasless welder? Local tool sales have been trading since 1999 and our staff have over 75 years expertise in Welding tool hire and sales.

About the Author

David Lee has 10 years of experience in writing Articles, Blogs and creative writing for numerous online article-submission directories. Besides this, he is also into Wildlife Photography and music.

3 in 1 Combo Welder Everlast PowerPro 256 Arc Start Fix

Inverter Welding Price

Learn More About Longevity Plasma Cutters and Welders – and Why You Need Them!   by NHPROEQUIP

First, what is plasma cutting, exactly? It is a process that is used to cut steel and other metals of different thicknesses (or sometimes other materials) using a plasma torch. In this process, an inert gas (in some units, compressed air) is blown at high speed out of a nozzle; at the same time an electrical arc is formed through that gas from the nozzle to the surface being cut, turning some of that gas to plasma. The plasma is sufficiently hot to melt the metal being cut and moves sufficiently fast to blow molten metal away from the cut.

Process

The HF Contact type uses a high-frequency, high-voltage spark to ionise the air through the torch head and initiate an arc. These require the torch to be in contact with the job material when starting, and so are not suitable for applications involving computer numerical controlled (CNC) cutting.

The Pilot Arc type uses a two cycle approach to producing plasma, avoiding the need for initial contact. First, a high-voltage, low current circuit is used to initialize a very small high-intensity spark within the torch body, thereby generating a small pocket of plasma gas. This is referred to as the pilot arc. The pilot arc has a return electrical path built into the torch head. The pilot arc will maintain itself until it is brought into proximity of the workpiece where it ignites the main cutting arc. Arcs are extremely hot and are in the range of 25,000 °C (45,000 °F).[1]

Plasma is an effective means of cutting thin and thick materials alike. Hand-held torches can usually cut up to 2 in (48 mm) thick steel plate, and stronger computer-controlled torches can cut steel up to 6″ (150 mm) thick. Since plasma cutters produce a very hot and very localized “cone” to cut with, they are extremely useful for cutting sheet metal in curved or angled shapes.

LONGEVITY is well-known for offering reasonably-priced and portable longevity cutters and MIG/MAG, TIG, Wire, Stick / Arc / MMA welders with and other welding equipment including multipurpose welders. LONGEVITY uses MOSFET and IGBT Inverter Technology inside their welding machines.

Here at Clark Heintz Tools & Equipment (www.NHProEquip.com) we service what we sell, we stock consumables, and WE OFFER A 5-YEAR WARRANTY. We also do quality control, set up, and finally, we bench-test your machine before it is packaged and shipped. We also offer FREE SHIPPING! And, lastly, THERE IS NO SALES TAX WHEN YOU BUY THROUGH US.

Here are highlights of our featured plasma cutters:

ForceCut 40d Plasma Cutter with Continuous Pilot Arc

Longevity Forcecut 40d is a series 40AMP Dual Voltage unit that is capable of cutting up to 1/2″ thick steel–and it out-performs the leading brands. Includes 60amp TORCH UPGRADE! This machine weighs 25 lbs and can run off 110 or 220 volt, making it the ultimate in portability. The ForceCut 40d can cut any kind of metal including aluminum, stainless steel, and even copper. This is the most capable machine on the market for its retail price. It runs off Inverter technology and comes with most of the components needed for a complete set up. This unit is backed by an extensive top rated warranty for 5 years that covers parts and labor for this unit.

ForceCut 50d Plasma Cutter with Continuous Pilot Arc

This unit is a Series 50AMP Dual Voltage 110/220v machine capable of cutting up to 3/4″ Steel. It weighs only 25lbs and can run off 110 or 220 volt, and can cut any kind of metal including aluminum, stainless steel, and copper, as well The 50D runs off Inverter Technology, and INCLUDES FREE SHIPPING and 100% Continuous Pilot Arc!

Forcecut 50D ALSO INCLUDES:

* Main Unit
* Cutting Torch (10FT 60amp torch upgrade!)
* Earth Clamp (10FT)
* Water separator with Bracket (Air regulator built in!)
* Air Hose for water separator connection
* Longevity Consumables: 3 piece tips, 3 piece electrodes and 3 piece shield cup
* Includes an unattached 220v – 30amp 3 prong power plug This plasma cutter comes with most of the components needed for a complete set up. INCLUDES FREE SHIPPING PLUS 100% CONSTANT ARC. 5-YEAR WARRANTY. PRICED AT ONLY $649.99.

p>ForceCut 40i Plasma Cutter with Continuous Pilot Arc

This Series 40AMP machine is capable of cutting up to 3/4″ thick Steel. This unit weighs only 32 lbs and runs off 220v-1 phase voltage. Runs off Inverter technology, and comes complete with most of the components needed for a complete set up, including a 220v power plug, which you can change to suit your outlet. The ForceCut 40i is dependable; it does not have an internal air compressor built in. Any shop or home compressor no matter size will do!
5-YEAR WARRANTY. PRICED AT ONLY $699.99 AND INCLUDES FREE SHIPPING!

ForceCut 50i Plasma Cutter includes Continuous Pilot Arc

and is capable of cutting up to 1″ thick Steel. This unit weighs only 32 lbs and runs off 220v-1phase voltage. It can also cut any kind of metal including aluminum, stainless steel, and even copper. Runs off Inverter technology, and also comes with most of the components needed for a complete set up including a 30amp 220v plug. The unit does not have an air compressor built in, but that makes it more dependable. Any shop or home compressor, regardless of the size, will do.
5-YEAR WARRANTY. PRICED AT ONLY $799.99 AND INCLUDES FREE SHIPPING!

ForceCut 60i IGBT Plasma Cutter with Continuous Pilot Arc

Longevity ForceCut 60i Plasma Cutter is ideal for cutting up to 1 1/4″ thick steel. 220v Single Phase Operation, it compares to and surpasses all leading brands. This Plasma Cutter weighs in at only 45 lbs, and can cut any kind of metal including aluminum, stainless steel or even copper–it is the most capable IGBT Pilot ARC Unit on the market for its retail price. It runs off Inverter technology, and also includes most of the components needed for a complete set up!
5-YEAR WARRANTY. PRICED AT ONLY $899.99, INCLUDING FREE SHIPPING!
ForceCut 80i Plasma Cutter with Continuous Pilot Arc

Longevity ForceCut Series 80i IGBT Plasma Cutter is perfect for cutting up to 1 3/4″ thick steel. It has 220v Single Phase Operation and is the most capable IGBT Pilot ARC unit on the market for its retail price, surpassing all leading brands. The ForceCut 80i weighs only 45 lbs and can cut any kind of metal including aluminum, stainless steel, and even copper.

The Longevity ForceCut 80i Plasma Cutter runs off Inverter technology, and comes with most of the components needed for a complete set up, including a Cutting Torch, an Earth Clamp, an Air Regulator with Bracket, an Air Hose, as well as a stock of Consumables to get you started: 3 piece tips, 3 piece electrodes, 3 piece shield cups. A lot of extras for one low price.

Please check out some of NHProEquip’s multi-purpose machines if you are interested in a TIG welder as well as a plasma cutter for a very affordable price!

Pilot Arc Starting Technology

With the Longevity ForceCut 80i IGBT Plasma Cutter, you will be able to start and keep a continuous arc going without having to touch your workpiece. The arc will activate anywhere in the air including upside-down plasma cutting.

The ForceCut 80i is an amazing plasma cutter–feel free to check out the Longevity ForceCut 80i Manual to discover more information about this plasma cutter.

WELDMAX 205i MULTI-PURPOSE D/C TIG, PLASMA, ARC

WeldMax 205i Multi Purpose Plasma Cutter / Welder has the full capability of welding any kind of metal except for aluminum! This machine is priced for upgrade! Why purchase just the plasma cutter or the welder when for a little bit more, you can get a 200amp DC TIG welder, a 160amp DC stick welder, and a 40amp plasma cutter that will cut through every kind of metal including aluminum! This machine is the total package! This welder is designed for light weight industrial welding and cutting, and perfect for the home or shop fabricator! 5-YEAR WARRANTY. THIS PLASMA CUTTER IS ONLY $899.99 AND INCLUDES FREE SHIPPING!!

About the Author

Amy Carmosino is the Web Marketing Specialist for Clark Heintz Tools & Equipment.

CompuSpot 900 Fusion Video Demonstration